How To Perform Netgear Wifi Extender Setup Without Wps?

The Internet has become one of the most essential parts of our daily life. Most of the people who perform all their tasks with the help of the internet require huge amounts of data to access their required resources on the internet. That is where wi-fi comes into the picture as it provides the user with an unlimited amount of internet at very high speeds.

In reality, a wi-fi router is installed in our homes or offices where there are many obstacles, such as walls, fridges, and TVs, between the user and the wi-fi system. This causes the range of wi-fi routers to fall to 10% of the claimed range. This is where the Netgear extender comes into the picture. It acts as an extender of the wi-fi router as it receives the radio waves from the wi-fi router and then releases it similar to the wi-fi router itself. If you have an older Netgear extender that you would like to reconfigure please reset the Netgear extender to default settings and start Netgear Wifi Extender Setup Without Wps.

Setup Netgear extender with an ethernet cable?

Due to the Netgear extender working similar to your wi-fi router, certain steps have to be properly taken for setting it up. If you want to connect your computer with the Netgear extender to get the most speed, then the best way would be to connect both of them using an ethernet cable. An ethernet cable is also a compulsion for connecting your computer with the Netgear extender by programming the wireless settings. the method by which you can configure the wireless settings by connecting your computer to your Netgear extender using an ethernet cable is as below:

Start by plugging your Netgear extender into a wall outlet of the place that you’re in.
Connect your computer and the Netgear extender with the help of an ethernet cable.
To get on the Netgear web page, type in http://tplinkrepeater.net/ on the browser of your computer. In case this doesn’t work, then try typing in http://192.168.0.254/.
You should click on the Quick setup option that will be visible on the display and then click on Next.
Then look through the options in the region section, and select your region. Then click on Next.
Then let your Netgear extender take a minute or two for scanning for wireless networks around it.
Look for the name of your wireless network in that list and click on it and then select Next.
Then the prompt would appear, asking for the password for your wireless network. Put your password on it.
Now you’ll have two options, depending on whether you want a single wireless network or you want a different network to be formed. Select ‘copy from the main router’ for the first condition and select ‘customize’ for the second condition.
Click on Next.
Check out all the network settings in the final window that is opened and if all of it is correct for you, then click on Finish.

How to set up the WPS button?

Your Netgear extender can also be set up using the WPS button in the back of your wi-fi router. Some Netgear extenders also have a WPS button on their back which could be used for their configuration. The method to do that is given below:

Plugin your Netgear extender to a power source that is near your wireless router.
Click on the WPS button that is located on your router’s back. It should signify that it is pressed with a LED light blink. If you don’t see it, then press it again.
Follow it by clicking on the WPS button that is situated on the back of your Netgear extender. It should also signify its activation with an LED blink.

However, if you don’t wish to follow the above steps, you can straightforwardly get the technical support team to help you. We will support you regarding the troubleshooting and the Setup Wifi Extender Netgear. Visit the website and take the services now to remove your Netgear device issues.